X SERIES WOOD RANGE HOOD
The X-Series hood is constructed from solid wood and veneer core plywood.
This hood is a hybrid between the large and smaller mantel hoods. The Sorrento legs are not applied so there is no a need to oversize the hood by the width of the legs. This hood can be ordered as small as 36″ wide.
This hood is a hybrid between the large and smaller mantel hoods. The Sorrento legs are not applied so there is no a need to oversize the hood by the width of the legs. This hood can be ordered as small as 36″ wide.
X SERIES Options
X SERIES Specs
Standard Widths:
-30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
-24, 30, 36, 42, 48 or custom
Removable Front Panel:
- Not available on this model
Standard Assumptions:
‐The legs are applied legs so they do not take up additional space (example a 42” hood will get the 42” liner)
‐Corbels will be shipped attached unless otherwise requested
‐Column Width is 8‐3/4”
‐Corbel size is around 5 x 5 x 10
Depth of hood:
-24‐3/8” from back to front of leg
Depth of Shelf:
-9‐1/2” deep
Distance Moldings Protrude Past Sides:
0"
Available Moldings:
Classic, or Simple
Available options:
‐Corbels – should be around 5 x 5 x 10
-30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
-24, 30, 36, 42, 48 or custom
Removable Front Panel:
- Not available on this model
Standard Assumptions:
‐The legs are applied legs so they do not take up additional space (example a 42” hood will get the 42” liner)
‐Corbels will be shipped attached unless otherwise requested
‐Column Width is 8‐3/4”
‐Corbel size is around 5 x 5 x 10
Depth of hood:
-24‐3/8” from back to front of leg
Depth of Shelf:
-9‐1/2” deep
Distance Moldings Protrude Past Sides:
0"
Available Moldings:
Classic, or Simple
Available options:
‐Corbels – should be around 5 x 5 x 10