LINCOLN SERIES WOOD RANGE HOOD
The Lincoln Series Hood offers clean and simple lines while maintaining an elegant presence. This hood can be ordered with or without a bottom base panel. You decide how many dividers you would like on the Upper and Base Panels (does not need to be the same).The upper panel is removable to allow for easy installation and ventilation inspection.
L2 – SERIES Models
L2 – SERIES Specs
Standard Widths:
30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
24, 30, 36, 42 or custom
Removable panel:
‐Upper door panel is removable. – upper door is applied and has 1/8” reveal on both sides and the top
Standard Assumptions:
Wood grain will be vertical on upper panel and sides ‐ Grain on bottom door or slab will be horizonal
Panel Rules: You may define the number of panels on base and top – they do not need to be the same.
30”- 48" wide hoods will have either 1‐2 panels.
Upper Panel – Hoods which are over 48” and not built with MDF will have 3 equal panels. Selecting a single panel requires building with MDF to avoid cracking/warping.
1/8” reveal on top and two sides
Base Panel – Hoods which are over 48” and not built with MDF will have 3 equal panels. Standard base is 6” ‐ panels must be flat. Selecting raised panel will increase base height to 8.75” Panels are equal size.
Depth of hood:
Top depth not including applied door is 16"
Base 22.25"
Available options:
Horizontal Grain – n/c
Delete Upper Panel
Sorrento pull out spice racks
Available customization:
Yes – recommended if using aftermarket vent
30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
24, 30, 36, 42 or custom
Removable panel:
‐Upper door panel is removable. – upper door is applied and has 1/8” reveal on both sides and the top
Standard Assumptions:
Wood grain will be vertical on upper panel and sides ‐ Grain on bottom door or slab will be horizonal
Panel Rules: You may define the number of panels on base and top – they do not need to be the same.
30”- 48" wide hoods will have either 1‐2 panels.
Upper Panel – Hoods which are over 48” and not built with MDF will have 3 equal panels. Selecting a single panel requires building with MDF to avoid cracking/warping.
1/8” reveal on top and two sides
Base Panel – Hoods which are over 48” and not built with MDF will have 3 equal panels. Standard base is 6” ‐ panels must be flat. Selecting raised panel will increase base height to 8.75” Panels are equal size.
Depth of hood:
Top depth not including applied door is 16"
Base 22.25"
Available options:
Horizontal Grain – n/c
Delete Upper Panel
Sorrento pull out spice racks
Available customization:
Yes – recommended if using aftermarket vent