JACKSONVILLE SERIES WOOD RANGE HOOD
The Jacksonville Series range hood is designed to mount between the cabinets. It has the popular chimney style look while allowing you to keep the run of the cabinets continuous. Please note that this hood is a full hood and it not a valance only. The J Series can be ordered with either the classical or simple molding and is available in sizes to fit up to a 60 inch range.
JACKSONVILLE SERIES Models
JACKSONVILLE SERIES Specs
Standard Widths
33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights
30, 36, 42, 48 or custom
Removable Front Option – Removable Face
No additional charge option
Changes box depth to 14”‐ overall depth the same. There is a 5/16” reveal in front of box
*On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Applied Removable Panel ‐ ARP
Decorative Applied molding removable panel is available as option
Standard assumptions
Grain will be vertical
Seam on front of cabinet between hardwood and plywood is highlighted with a V bead
Depth of rear box
Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the same ‐ 14” if ordered with removable front
Depth of hood
22.25"
Depth of hood to tips of moldings
23‐3/8"
Distance moldings protrude past sides
N/A
Height
All line drawings reflect a 30” tall hood, when ordering taller hoods, the increase will occur in chimney and box section (pyramid height will remain constant for different heights
Available Moldings
Classic, Simple or Basic
Available Options
RF‐ Removable front
ARP‐ Decorative Applied Molding Removable panel
Sorrento pull out spice racks
33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights
30, 36, 42, 48 or custom
Removable Front Option – Removable Face
No additional charge option
Changes box depth to 14”‐ overall depth the same. There is a 5/16” reveal in front of box
*On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Applied Removable Panel ‐ ARP
Decorative Applied molding removable panel is available as option
Standard assumptions
Grain will be vertical
Seam on front of cabinet between hardwood and plywood is highlighted with a V bead
Depth of rear box
Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the same ‐ 14” if ordered with removable front
Depth of hood
22.25"
Depth of hood to tips of moldings
23‐3/8"
Distance moldings protrude past sides
N/A
Height
All line drawings reflect a 30” tall hood, when ordering taller hoods, the increase will occur in chimney and box section (pyramid height will remain constant for different heights
Available Moldings
Classic, Simple or Basic
Available Options
RF‐ Removable front
ARP‐ Decorative Applied Molding Removable panel
Sorrento pull out spice racks