HARTFORD SERIES WOOD RANGE HOOD
The Hartford Series range hood is very similar to the Washington Series hood however it does not have its columns extend all the way to the countertop. The H is a classic mantle design and is available in standard sizes up to 90″ wide.
HARTFORD SERIES Models
HARTFORD SERIES Specs
Standard Widths:
54, 60, 66 or custom
Standard Heights:
44, 50, 56 ‐ To determine height take ceiling height minus 66” and
plus 13.5”. This will leave hood 30” above range .
Removable panel:
Standard on hood unless request otherwise
Standard Assumptions:
‐Will have a removable panel with a 4” top rail with 2” being fixed
‐54” and 60” will have two panels while wider hoods will be 3 panels
‐Minimum width would be range plus 18” for legs unless building
code requires more width
‐9” wide columns
Depth of hood:
22.25"
Depth of hood to tips of moldings:
Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides:
N/A
Available Moldings:
Classic, Simple or Basic
Available option:
Corbels – should be around 5 x 5 x 10
54, 60, 66 or custom
Standard Heights:
44, 50, 56 ‐ To determine height take ceiling height minus 66” and
plus 13.5”. This will leave hood 30” above range .
Removable panel:
Standard on hood unless request otherwise
Standard Assumptions:
‐Will have a removable panel with a 4” top rail with 2” being fixed
‐54” and 60” will have two panels while wider hoods will be 3 panels
‐Minimum width would be range plus 18” for legs unless building
code requires more width
‐9” wide columns
Depth of hood:
22.25"
Depth of hood to tips of moldings:
Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides:
N/A
Available Moldings:
Classic, Simple or Basic
Available option:
Corbels – should be around 5 x 5 x 10
