FOXCOTE SERIES WOOD RANGE HOOD
The Foxcote (FX) Series range hood is a transition range hood with a multitude of options for the creative designer. This range hood can be a stand alone unit or it can be mounted flush between two cabinets. The FX can be ordered with or without panels. When the FX is ordered with an Upper Panel – you can specify how many panels you prefer 1- 2 or 3.
(Please note that the 1 panel option does require the panel to be a paint grade mdf to prevent warping)
When an Upper Panel is selected, it will be removable which will allow for easier installation and ventilation inspection. The FX can also be ordered with a Base Panel. This base panel can also be ordered with 1, 2 or 3 panels. The standard base is 6″ tall and becomes 8.75″ when a stainless baffle liner is ordered with the hood.
The grain on this hood will be horizontal unless specified otherwise.
(Please note that the 1 panel option does require the panel to be a paint grade mdf to prevent warping)
When an Upper Panel is selected, it will be removable which will allow for easier installation and ventilation inspection. The FX can also be ordered with a Base Panel. This base panel can also be ordered with 1, 2 or 3 panels. The standard base is 6″ tall and becomes 8.75″ when a stainless baffle liner is ordered with the hood.
The grain on this hood will be horizontal unless specified otherwise.
FX – SERIES Models
FX – SERIES Specs
Standard Widths:
30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
24, 30, 36, 42, 48, or custom - Order height needed – do not cut down in field
Removable Top option (RT):
RT is a no additional charge option which is available ‐ Not available on 30” wide hoods ‐ requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips
*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions:
Grain is horizontal. You may specify the number of door panels on base and top – they do not need to be the same.
Panel RULES
30” wide hoods can only have 1‐2 panels
6” base – panels must be flat not raised or can increase base height to 8.75”
Use of a single panel requires building with MDF to avoid warping.
Panels are all spaced equally
Upper panel – 1/8” reveal on top and two sides
Panel on top – customer will define number of panels. Hoods which are over 48” and panels are not built with MDF or flat veneered MDF will have 3 equal panels. Single panels are only available using MDF
Panel on base– customer will define number of panels, hoods which are over 48” AND not MDF will have 3 equal door panels. Standard base is 6” ‐ Base panel must be a FLAT panel or increased to 8.75” for a raised panel.
Depth of hood:
Base 22.25" Top is 12"
Available Options:
Horizontal Grain – No Extra Charge
‐Battens
Sorrento pull out spice racks
30, 36, 42, 48, 54 and 60 or custom
Standard Heights:
24, 30, 36, 42, 48, or custom - Order height needed – do not cut down in field
Removable Top option (RT):
RT is a no additional charge option which is available ‐ Not available on 30” wide hoods ‐ requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips
*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions:
Grain is horizontal. You may specify the number of door panels on base and top – they do not need to be the same.
Panel RULES
30” wide hoods can only have 1‐2 panels
6” base – panels must be flat not raised or can increase base height to 8.75”
Use of a single panel requires building with MDF to avoid warping.
Panels are all spaced equally
Upper panel – 1/8” reveal on top and two sides
Panel on top – customer will define number of panels. Hoods which are over 48” and panels are not built with MDF or flat veneered MDF will have 3 equal panels. Single panels are only available using MDF
Panel on base– customer will define number of panels, hoods which are over 48” AND not MDF will have 3 equal door panels. Standard base is 6” ‐ Base panel must be a FLAT panel or increased to 8.75” for a raised panel.
Depth of hood:
Base 22.25" Top is 12"
Available Options:
Horizontal Grain – No Extra Charge
‐Battens
Sorrento pull out spice racks