ELEVATION SERIES WOOD RANGE HOOD
The Elevation Series range hood is the pinnacle of range hoods. This hood has beautiful sloping curves which add elegance and grace to any kitchen. This hood can be ordered with either classical or simple moldings. This hood also has a veneer delete option if you are planning to plaster the top portion of the hood. A decorative metal banding option is also available. Custom widths and heights are always available.
ELEVATION SERIES Models
ELEVATION SERIES Specs
Standard Widths:
36, 42, 48, 54 and 60 or custom
Standard Heights:
30, 36, 42, 48, or custom - Order height needed – do not cut down in field
Removable Top option (RT):
‐You have the option to have the top removable at no extra charge ‐ Not available on 30” wide hoods ‐ requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips
*On Removable Top hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions:
Grain will be vertical unless specified otherwise
Depth of hood:
22.25"
Depth of hood to tips of moldings:
Hardwood or Stainless base (22‐1/4) Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides:
SS or Hardwood ‐ 0 Classical , Simple & Basic add 2‐1/4” to overall width
Available Moldings:
Hardwood (none), Classic, Simple or Basic
Available Options:
RT‐ Removable top ‐ Veneer delete on upper section if using plaster – center molding will be shipped loose (Not suitable for painting) ‐ Stainless Steel baffle base ‐ Sorrento pull out spice racks
36, 42, 48, 54 and 60 or custom
Standard Heights:
30, 36, 42, 48, or custom - Order height needed – do not cut down in field
Removable Top option (RT):
‐You have the option to have the top removable at no extra charge ‐ Not available on 30” wide hoods ‐ requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips
*On Removable Top hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions:
Grain will be vertical unless specified otherwise
Depth of hood:
22.25"
Depth of hood to tips of moldings:
Hardwood or Stainless base (22‐1/4) Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides:
SS or Hardwood ‐ 0 Classical , Simple & Basic add 2‐1/4” to overall width
Available Moldings:
Hardwood (none), Classic, Simple or Basic
Available Options:
RT‐ Removable top ‐ Veneer delete on upper section if using plaster – center molding will be shipped loose (Not suitable for painting) ‐ Stainless Steel baffle base ‐ Sorrento pull out spice racks
